| Panel & Optical Structure |
| Manufacturing Technology |
Laser-dot, engraved-line, laser-engraved, screen-printed, or UV-printed optical pattern selected by size, uniformity, volume, and budget. |
| Pattern Capacity |
Laser-dot panels up to 1500 mm wide; screen-printed panels up to 1200 x 2400 mm. Other processes require drawing review. |
| PMMA Panel Thickness |
4-8 mm typical for this frameless construction; 3-10 mm options can be reviewed for other panel structures. |
| Finished Assembly Depth |
Approximately 16-50 mm according to the opal face, support, profile, mounting, and project load. |
| Finished Size |
Custom to drawing. Large or transport-sensitive surfaces can be divided into aligned, serviceable modules. |
| Overall Finish |
Frameless, concealed aluminum channel, crystal edge, taped edge, or protected rear profile as required. |
| Light Entry |
One, two, or four edges, selected from optical span, panel shape, target uniformity, and thermal load. |
| Optical Span Guidance |
Best results are normally developed within a 1000 mm guide span. Spans above approximately 300 mm, and square or near-square panels, may require four-edge input after sample review. |
| Diffusion Layer |
Optional opal film, diffuser sheet, or approved translucent face material. |
| Reflection Layer |
Optional 0.25-0.40 mm high-reflectance sheet or project-selected protected rear panel. |
| Mounting |
Mounting profile, support points, and installation hardware are developed from the project drawing and included only when itemized. |
| Light & Electrical |
| Light Effect |
Standard tunable-white LED strips: 2700K / 4000K / 6500K reference settings. Other strip options include single-CCT white, tunable white, RGB, and RGBW; white-light selections cover 2800–7500K depending on the selected strip. RGB color effects are specified separately. CRI above 85 is the standard reference; higher-CRI packages are available by review. |
| Input Voltage |
12V or 24V DC. Larger panels generally use 24V; the power supply, controller, and cable rating are sized to the finished LED load. |
| LED Strip Reference |
Approximately 12 W/m and up to approximately 1400 lm/m at source-strip level, subject to the selected LED package. Finished panel luminance is confirmed by sample. |
| Dimming & Control |
PWM, DALI, or DMX control can be integrated through a compatible driver or controller selected for the approved LED configuration. |
| Cable Exit & Connector |
Exit position, lead length, connector type, and control interface are customized to the installation drawing. |
| Operating Environment |
Indoor use is standard. The operating range is confirmed for the selected LED, driver, sealing, and thermal system. |
| Protected Electrical Option |
Protected LED strips, sealed connectors, controlled cable exits, and a suitable driver enclosure can be specified for damp locations. |
| Design Life Basis |
Project-specific. The quotation identifies the selected LED and driver basis, duty cycle, and thermal conditions used for the design-life reference. |
| Production & Delivery |
| Sample Production |
Normally 7-15 production days after drawing and specification confirmation. Logistics transit time is not included. |
| Bulk Production |
Lead time is confirmed after sample approval according to structure, quantity, material availability, and packing requirements. |
| Shipping & Freight |
Courier, air, sea, or a nominated forwarder can be selected. Freight is excluded unless itemized in the quotation. |
