Frameless Series / Product Detail
Frameless Light Guide Panels
A finished product made from the light guide plate, with the face, edge lighting, rear support, and wiring reviewed as one assembly.
Technical Reference
Specifications
LGP, opal face, reflective backing, concealed edge LEDs, and wiring form one project-specific assembly.
| Physical | |
|---|---|
| Finished Assembly Depth | 12.5–50 mm finished system; not the PMMA thickness |
| Finished Size | Maximum finished size: 1500 × 2000 mm. Custom dimensions and support details follow the approved drawing. |
| IP rating | IP40 indoor reference; no water protection. Other environments require a specified assembly. |
| Optical | |
| Color temperature and effects | Single-CCT white, tunable white, RGB or RGBW. Tunable-white reference settings: 2700K / 4000K / 6500K; other custom white strips: 2800–7500K. |
| CRI | Above 85 as the FH standard reference; higher-CRI strips by selection. |
| Electrical | |
| Input Voltage | 12 V or 24 V DC |
| LED Strip Reference | FH uses custom LED strips. Strip power, LED package, CRI and finished panel brightness are specified for the selected configuration. |
| Power supply | MEAN WELL, matched to the voltage, load and control method; included when itemized. |
More engineering specifications
| Physical | |
|---|---|
| PMMA Panel Thickness | 2, 3, 4, 5, 6, 8, 10 mm options, selected for the approved frameless construction |
| Reference weight | 15 kg/m² for the 12.5 mm reference configuration; other builds vary. |
| Overall Finish | Frameless, concealed aluminum channel, crystal edge, taped edge, or protected rear profile as required. |
| Mounting | Mounting profile, support points, and installation hardware are developed from the project drawing and included only when itemized. |
| Optical | |
| Light Entry | One, two, or four edges, selected from optical span, panel shape, target uniformity, and thermal load. |
| Optical Span Guidance | Best results are normally developed within a 1000 mm guide span. Spans above approximately 300 mm, and square or near-square panels, may require four-edge input after sample review. |
| Diffusion Layer | Optional opal film, diffuser sheet, or approved translucent face material. |
| Reflection Layer | Optional 0.25-0.40 mm high-reflectance sheet or project-selected protected rear panel. |
| Electrical | |
| Power consumption | Custom strip power per metre and total panel power are specified separately for the selected size and light output. |
| Dimming & Control | PWM, DALI, or DMX control can be integrated through a compatible driver or controller selected for the approved LED configuration. |
| Cable Exit & Connector | Exit position, lead length, connector type, and control interface are customized to the installation drawing. |
Construction & light entry
Product photographs & control demo
The sample shows the rear perimeter and backing. Confirm the support and installation clearance on the drawing.
Visible holes and fasteners belong to this sample. Their position and use must be confirmed for the installation.
The optical pattern redirects edge light. This photograph is a sample record, not a measured uniformity report.
These sample photographs show one build, not a universal specification. Dimensions, electrical load, mounting, and acceptance criteria remain project-specific.
Watch the sample control demonstration (11 seconds)
Original sample demonstration, without audio. Camera exposure and white balance affect the appearance; this is not a calibrated brightness or color measurement.
Product resources
Questions before quotation
Key details buyers usually confirm first.
What is supplied as a Frameless panel?
Frameless is a finished illuminated panel built around an LGP, with the face, edge LEDs, backing and wiring. External power supplies, controllers and mounting hardware are included only when itemized.
How is Frameless different from an LGP component?
A bare LGP is the optical plate, not a complete light. Frameless adds the lighting and supporting assembly; its finished depth is greater than the PMMA thickness.
What limits apply to a finished panel?
Custom finished sizes require review of overall depth, rear support, light entry and transport constraints. PMMA thickness is not the finished assembly depth. Large surfaces may use multiple modules; joint appearance must be agreed in the drawing and sample.
What should I send for a borderless panel quotation?
Send the finished size, quantity, light color, viewing distance, installation drawing, available depth, cable exit, mounting method, destination, and any electrical or packing requirements.
Ordering and documentation
| Ordering and documentation | |
|---|---|
| Minimum order | 10 pcs |
| Samples | 7 days after drawing and specification approval; shipping time is additional. |
| LED configuration | FH uses custom LED strips. Electrical and optical values are confirmed for the selected configuration. |
| Compliance | Applicable CE / RoHS documentation is available by model. Scope is confirmed in the quotation. |
Request a Frameless Panel
Send the finished size, edge detail, light color, and installation drawing.
FH Lighting will confirm the opal face, PMMA thickness, LED entry, rear support, edge finish, cable exit, mounting method, and sample route as one finished system.
Minimum order10 pcs
Samples7 days after drawing and specification approval; shipping time is additional.